David Vorick [ARCHIVE] on Nostr: 📅 Original date posted:2017-04-17 📝 Original message:*Rationale:* A node that ...
📅 Original date posted:2017-04-17
📝 Original message:*Rationale:*
A node that stores the full blockchain (I will use the term archival node)
requires over 100GB of disk space, which I believe is one of the most
significant barriers to more people running full nodes. And I believe the
ecosystem would benefit substantially if more users were running full nodes.
The best alternative today to storing the full blockchain is to run a
pruned node, which keeps only the UTXO set and throws away already verified
blocks. The operator of the pruned node is able to enjoy the full security
benefits of a full node, but is essentially leeching the network, as they
performed a large download likely without contributing anything back.
This puts more pressure on the archival nodes, as the archival nodes need
to pick up the slack and help new nodes bootstrap to the network. As the
pressure on archival nodes grows, fewer people will be able to actually run
archival nodes, and the situation will degrade. The situation would likely
become problematic quickly if bitcoin-core were to ship with the defaults
set to a pruned node.
Even further, the people most likely to care about saving 100GB of disk
space are also the people least likely to care about some extra bandwidth
usage. For datacenter nodes, and for nodes doing lots of bandwidth, the
bandwidth is usually the biggest cost of running the node. For home users
however, as long as they stay under their bandwidth cap, the bandwidth is
actually free. Ideally, new nodes would be able to bootstrap from nodes
that do not have to pay for their bandwidth, instead of needing to rely on
a decreasing percentage of heavy-duty archival nodes.
I have (perhaps incorrectly) identified disk space consumption as the most
significant factor in your average user choosing to run a pruned node or a
lite client instead of a full node. The average user is not typically too
worried about bandwidth, and is also not typically too worried about
initial blockchain download time. But the 100GB hit to your disk space can
be a huge psychological factor, especially if your hard drive only has
500GB available in the first place, and 250+ GB is already consumed by
other files you have.
I believe that improving the disk usage situation would greatly benefit
decentralization, especially if it could be done without putting pressure
on archival nodes.
*Small Nodes Proposal:*
I propose an alternative to the pruned node that does not put undue
pressure on archival nodes, and would be acceptable and non-risky to ship
as a default in bitcoin-core. For lack of a better name, I'll call this new
type of node a 'small node'. The intention is that bitcoin-core would
eventually ship 'small nodes' by default, such that the expected amount of
disk consumption drops from today's 100+ GB to less than 30 GB.
My alternative proposal has the following properties:
+ Full nodes only need to store ~20% of the blockchain
+ With very high probability, a new node will be able to recover the entire
blockchain by connecting to 6 random small node peers.
+ An attacker that can eliminate a chosen+ 95% of the full nodes running
today will be unable to prevent new nodes from downloading the full
blockchain, even if the attacker is also able to eliminate all archival
nodes. (assuming all nodes today were small nodes instead of archival nodes)
Method:
A small node will pick an index [5, 256). This index is that node's
permanent index. When storing a block, instead of storing the full block,
the node will use Reed-Solomon coding to erasure code the block using a
5-of-256 scheme. The result will be 256 pieces that are 20% of the size of
the block each. The node picks the piece that corresponds to its index, and
stores that instead. (Indexes 0-4 are reserved for archival nodes -
explained later)
The node is now storing a fragment of every block. Alone, this fragment
cannot be used to recover any piece of the blockchain. However, when paired
with any 5 unique fragments (fragments of the same index will not be
unique), the full block can be recovered.
Nodes can optionally store more than 1 fragment each. At 5 fragments, the
node becomes a full archival node, and the chosen indexes should be 0-4.
This is advantageous for the archival node as the encoded data for the
first 5 indexes will actually be identical to the block itself - there is
no computational overhead for selecting the first indexes. There is also no
need to choose random indexes, because the full block can be recovered no
matter which indexes are chosen.
When connecting to new peers, the indexes of each peer needs to be known.
Once peers totaling 5 unique indexes are discovered, blockchain download
can begin. Connecting to just 5 small node peers provides a >95% chance of
getting 5 uniques, with exponentially improving odds of success as you
connect to more peers. Connecting to a single archive node guarantees that
any gaps can be filled.
A good encoder should be able to turn a block into a 5-of-256 piece set in
under 10 milliseconds using a single core on a standard consumer desktop.
This should not slow down initial blockchain download substantially, though
the overhead is more than a rounding error.
*DoS Prevention:*
A malicious node may provide garbage data instead of the actual piece.
Given just the garbage data and 4 other correct pieces, it is impossible
(best I know anyway) to tell which piece is the garbage piece.
One option in this case would be to seek out an archival node that could
verify the correctness of the pieces, and identify the malicious node.
Another option would be to have the small nodes store a cryptographic
checksum of each piece. Obtaining the cryptographic checksum for all 256
pieces would incur a nontrivial amount of hashing (post segwit, as much as
100MB of extra hashing per block), and would require an additional ~4kb of
storage per block. The hashing overhead here may be prohibitive.
Another solution would be to find additional pieces and brute-force
combinations of 5 until a working combination was discovered. Though this
sounds nasty, it should take less than five seconds of computation to find
the working combination given 5 correct pieces and 2 incorrect pieces. This
computation only needs to be performed once to identify the malicious peers.
I also believe that alternative erasure coding schemes exist which actually
are able to identify the bad pieces given sufficient good pieces, however I
don't know if they have the same computational performance as the best
Reed-Solomon coding implementations.
*Deployment:*
Small nodes are completely useless unless the critical mass of 5 pieces can
be obtained. The first version that supports small node block downloads
should default everyone to an archival node (meaning indexes 0-4 are used)
Once there are enough small-node-enabled archive nodes, the default can be
switched so that nodes only have a single index by default. In the first
few days, when there are only a few small nodes, the previously-deployed
archival nodes can help fill in the gaps, and the small nodes can be useful
for blockchain download right away.
----------------------------------
This represents a non-trivial amount of code, but I believe that the result
would be a non-trivial increase in the percentage of users running full
nodes, and a healthier overall network.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20170417/513fc363/attachment.html>;
📝 Original message:*Rationale:*
A node that stores the full blockchain (I will use the term archival node)
requires over 100GB of disk space, which I believe is one of the most
significant barriers to more people running full nodes. And I believe the
ecosystem would benefit substantially if more users were running full nodes.
The best alternative today to storing the full blockchain is to run a
pruned node, which keeps only the UTXO set and throws away already verified
blocks. The operator of the pruned node is able to enjoy the full security
benefits of a full node, but is essentially leeching the network, as they
performed a large download likely without contributing anything back.
This puts more pressure on the archival nodes, as the archival nodes need
to pick up the slack and help new nodes bootstrap to the network. As the
pressure on archival nodes grows, fewer people will be able to actually run
archival nodes, and the situation will degrade. The situation would likely
become problematic quickly if bitcoin-core were to ship with the defaults
set to a pruned node.
Even further, the people most likely to care about saving 100GB of disk
space are also the people least likely to care about some extra bandwidth
usage. For datacenter nodes, and for nodes doing lots of bandwidth, the
bandwidth is usually the biggest cost of running the node. For home users
however, as long as they stay under their bandwidth cap, the bandwidth is
actually free. Ideally, new nodes would be able to bootstrap from nodes
that do not have to pay for their bandwidth, instead of needing to rely on
a decreasing percentage of heavy-duty archival nodes.
I have (perhaps incorrectly) identified disk space consumption as the most
significant factor in your average user choosing to run a pruned node or a
lite client instead of a full node. The average user is not typically too
worried about bandwidth, and is also not typically too worried about
initial blockchain download time. But the 100GB hit to your disk space can
be a huge psychological factor, especially if your hard drive only has
500GB available in the first place, and 250+ GB is already consumed by
other files you have.
I believe that improving the disk usage situation would greatly benefit
decentralization, especially if it could be done without putting pressure
on archival nodes.
*Small Nodes Proposal:*
I propose an alternative to the pruned node that does not put undue
pressure on archival nodes, and would be acceptable and non-risky to ship
as a default in bitcoin-core. For lack of a better name, I'll call this new
type of node a 'small node'. The intention is that bitcoin-core would
eventually ship 'small nodes' by default, such that the expected amount of
disk consumption drops from today's 100+ GB to less than 30 GB.
My alternative proposal has the following properties:
+ Full nodes only need to store ~20% of the blockchain
+ With very high probability, a new node will be able to recover the entire
blockchain by connecting to 6 random small node peers.
+ An attacker that can eliminate a chosen+ 95% of the full nodes running
today will be unable to prevent new nodes from downloading the full
blockchain, even if the attacker is also able to eliminate all archival
nodes. (assuming all nodes today were small nodes instead of archival nodes)
Method:
A small node will pick an index [5, 256). This index is that node's
permanent index. When storing a block, instead of storing the full block,
the node will use Reed-Solomon coding to erasure code the block using a
5-of-256 scheme. The result will be 256 pieces that are 20% of the size of
the block each. The node picks the piece that corresponds to its index, and
stores that instead. (Indexes 0-4 are reserved for archival nodes -
explained later)
The node is now storing a fragment of every block. Alone, this fragment
cannot be used to recover any piece of the blockchain. However, when paired
with any 5 unique fragments (fragments of the same index will not be
unique), the full block can be recovered.
Nodes can optionally store more than 1 fragment each. At 5 fragments, the
node becomes a full archival node, and the chosen indexes should be 0-4.
This is advantageous for the archival node as the encoded data for the
first 5 indexes will actually be identical to the block itself - there is
no computational overhead for selecting the first indexes. There is also no
need to choose random indexes, because the full block can be recovered no
matter which indexes are chosen.
When connecting to new peers, the indexes of each peer needs to be known.
Once peers totaling 5 unique indexes are discovered, blockchain download
can begin. Connecting to just 5 small node peers provides a >95% chance of
getting 5 uniques, with exponentially improving odds of success as you
connect to more peers. Connecting to a single archive node guarantees that
any gaps can be filled.
A good encoder should be able to turn a block into a 5-of-256 piece set in
under 10 milliseconds using a single core on a standard consumer desktop.
This should not slow down initial blockchain download substantially, though
the overhead is more than a rounding error.
*DoS Prevention:*
A malicious node may provide garbage data instead of the actual piece.
Given just the garbage data and 4 other correct pieces, it is impossible
(best I know anyway) to tell which piece is the garbage piece.
One option in this case would be to seek out an archival node that could
verify the correctness of the pieces, and identify the malicious node.
Another option would be to have the small nodes store a cryptographic
checksum of each piece. Obtaining the cryptographic checksum for all 256
pieces would incur a nontrivial amount of hashing (post segwit, as much as
100MB of extra hashing per block), and would require an additional ~4kb of
storage per block. The hashing overhead here may be prohibitive.
Another solution would be to find additional pieces and brute-force
combinations of 5 until a working combination was discovered. Though this
sounds nasty, it should take less than five seconds of computation to find
the working combination given 5 correct pieces and 2 incorrect pieces. This
computation only needs to be performed once to identify the malicious peers.
I also believe that alternative erasure coding schemes exist which actually
are able to identify the bad pieces given sufficient good pieces, however I
don't know if they have the same computational performance as the best
Reed-Solomon coding implementations.
*Deployment:*
Small nodes are completely useless unless the critical mass of 5 pieces can
be obtained. The first version that supports small node block downloads
should default everyone to an archival node (meaning indexes 0-4 are used)
Once there are enough small-node-enabled archive nodes, the default can be
switched so that nodes only have a single index by default. In the first
few days, when there are only a few small nodes, the previously-deployed
archival nodes can help fill in the gaps, and the small nodes can be useful
for blockchain download right away.
----------------------------------
This represents a non-trivial amount of code, but I believe that the result
would be a non-trivial increase in the percentage of users running full
nodes, and a healthier overall network.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20170417/513fc363/attachment.html>;