Matt Corallo [ARCHIVE] on Nostr: 📅 Original date posted:2013-11-06 📝 Original message:Recently, there has been a ...
📅 Original date posted:2013-11-06
📝 Original message:Recently, there has been a reasonable amount of discussion about the
continued fragility of the public Bitcoin network on IRC and elsewhere
(1). To this extent, I'm organizing a system of peering between nodes in
the network by creating a system of high-speed relay nodes for miners
and merchants/exchanges. This system will a) act as a fallback in the
case that the public Bitcoin network encounters issues and b) decrease
block propagation times between miners.
It is NOT designed to in any way replace or decrease the need for the
public Bitcoin P2P network. It is NOT any kind of attempt at
centralization, and I still encourage interested parties to establish
their own private peering agreements with large miners as needed.
Currently the network consists of one specially-designed relay node, but
I hope to bring more online in the coming days.
This network is open to everyone via a few public relay nodes, but also
will have nodes which are made available only to large miners and
merchants/exchanges to mitigate the ability of malicious parties to DoS
the network.
To peer with the public relay nodes, simply select the closest region
out of us-west (West Coast US), us-east (East Coast US), eu (Western
Europe), au (Australia), or jpy (Japan) and add
public.REGION.relay.mattcorallo.com to your addnode list. Note that
since all of the relay nodes will relay between each other, you gain no
latency advantage by peering with more than the closest node to you (and
currently all the regions map to one node, so there they're redundant
anyway).
For each relay node, you can connect to either port 8334 or 8335.
Connecting on port 8334 will relay only blocks, and port 8335 will relay
both blocks and transactions. The relay nodes will request any
transactions which appear in your invs no matter which port you connect to.
Relay node details:
* The relay nodes do some data verification to prevent DoS, but in
order to keep relay fast, they do not fully verify the data they are
relaying, thus YOU SHOULD NEVER mine a block building on top of a
relayed block without fully checking it with your own bitcoin validator
(as you would any other block relayed from the P2P network).
* The relay nodes do not follow the standard inv-getdata-tx/block flow,
but instead relay transactions/blocks immediately after they have done
their cursory verification. They do keep some track of whether or not
your nodes claim to have seen the transactions/blocks before relaying,
but you may see transactions/blocks being sent which you already have
and have not requested, if this is a problem for you due to bandwith
issues, you should reconsider your bandwith constraints and/or are
peering with too many nodes.
* The relay nodes will all relay among themselves very quickly, so
there is no advantage to peering with as many relay nodes as you can
find, in fact, the increased incoming bandwidth during block relay
spikes may result in higher latency for your nodes.
* The relay nodes are NOT designed to ensure that you never miss data,
and may fail to relay some transactions. Additionally, because the relay
nodes do not respond to standard getdata requests, if you miss a relay
and then reconnect, that data will not be sent again by the relay nodes.
The relay nodes are NOT a replacement for having peers on the standard
P2P network, they are only there to augment the existing P2P network.
If you are a merchant/exchange/large miner/other important node operator
and wish to gain access to additional domain names which map to relay
nodes with fewer peers, please fill out the form at
https://docs.google.com/forms/d/1UL82QdcXXEhZwSHJAK04Sk_cWg4zLOu8a216nO7Mt8c/viewform
You can find the source for the relay nodes at
https://github.com/TheBlueMatt/RelayNode
If you have any comments/concerns/suggestions, please do not hesitate to
email bitcoin-peering at mattcorallo.com
Thanks,
Matt
(1) There has been extended discussion on #bitcoin-wizards as well as
#bitcoin-dev of the very small number of active, listening nodes.
Additionally, because many of those nodes are versions prior to 0.8.4,
it seems very likely that maliciously creating network splits or at
least drastically reducing the number of peers for most nodes would not
be particularly challenging in the current network. Also,
http://www.tik.ee.ethz.ch/file/49318d3f56c1d525aabf7fda78b23fc0/P2P2013_041.pdf
noted that they were able to single-handledly decrease the network-wide
orphan rate by around 50% by improving network peering. Finally, you've
all seen the recent discussion on malicious mining algorithms. Though
those are not entirely prevented by reducing block propagation times,
they can be significantly limited compared to the current, rather
disjoint, network.
📝 Original message:Recently, there has been a reasonable amount of discussion about the
continued fragility of the public Bitcoin network on IRC and elsewhere
(1). To this extent, I'm organizing a system of peering between nodes in
the network by creating a system of high-speed relay nodes for miners
and merchants/exchanges. This system will a) act as a fallback in the
case that the public Bitcoin network encounters issues and b) decrease
block propagation times between miners.
It is NOT designed to in any way replace or decrease the need for the
public Bitcoin P2P network. It is NOT any kind of attempt at
centralization, and I still encourage interested parties to establish
their own private peering agreements with large miners as needed.
Currently the network consists of one specially-designed relay node, but
I hope to bring more online in the coming days.
This network is open to everyone via a few public relay nodes, but also
will have nodes which are made available only to large miners and
merchants/exchanges to mitigate the ability of malicious parties to DoS
the network.
To peer with the public relay nodes, simply select the closest region
out of us-west (West Coast US), us-east (East Coast US), eu (Western
Europe), au (Australia), or jpy (Japan) and add
public.REGION.relay.mattcorallo.com to your addnode list. Note that
since all of the relay nodes will relay between each other, you gain no
latency advantage by peering with more than the closest node to you (and
currently all the regions map to one node, so there they're redundant
anyway).
For each relay node, you can connect to either port 8334 or 8335.
Connecting on port 8334 will relay only blocks, and port 8335 will relay
both blocks and transactions. The relay nodes will request any
transactions which appear in your invs no matter which port you connect to.
Relay node details:
* The relay nodes do some data verification to prevent DoS, but in
order to keep relay fast, they do not fully verify the data they are
relaying, thus YOU SHOULD NEVER mine a block building on top of a
relayed block without fully checking it with your own bitcoin validator
(as you would any other block relayed from the P2P network).
* The relay nodes do not follow the standard inv-getdata-tx/block flow,
but instead relay transactions/blocks immediately after they have done
their cursory verification. They do keep some track of whether or not
your nodes claim to have seen the transactions/blocks before relaying,
but you may see transactions/blocks being sent which you already have
and have not requested, if this is a problem for you due to bandwith
issues, you should reconsider your bandwith constraints and/or are
peering with too many nodes.
* The relay nodes will all relay among themselves very quickly, so
there is no advantage to peering with as many relay nodes as you can
find, in fact, the increased incoming bandwidth during block relay
spikes may result in higher latency for your nodes.
* The relay nodes are NOT designed to ensure that you never miss data,
and may fail to relay some transactions. Additionally, because the relay
nodes do not respond to standard getdata requests, if you miss a relay
and then reconnect, that data will not be sent again by the relay nodes.
The relay nodes are NOT a replacement for having peers on the standard
P2P network, they are only there to augment the existing P2P network.
If you are a merchant/exchange/large miner/other important node operator
and wish to gain access to additional domain names which map to relay
nodes with fewer peers, please fill out the form at
https://docs.google.com/forms/d/1UL82QdcXXEhZwSHJAK04Sk_cWg4zLOu8a216nO7Mt8c/viewform
You can find the source for the relay nodes at
https://github.com/TheBlueMatt/RelayNode
If you have any comments/concerns/suggestions, please do not hesitate to
email bitcoin-peering at mattcorallo.com
Thanks,
Matt
(1) There has been extended discussion on #bitcoin-wizards as well as
#bitcoin-dev of the very small number of active, listening nodes.
Additionally, because many of those nodes are versions prior to 0.8.4,
it seems very likely that maliciously creating network splits or at
least drastically reducing the number of peers for most nodes would not
be particularly challenging in the current network. Also,
http://www.tik.ee.ethz.ch/file/49318d3f56c1d525aabf7fda78b23fc0/P2P2013_041.pdf
noted that they were able to single-handledly decrease the network-wide
orphan rate by around 50% by improving network peering. Finally, you've
all seen the recent discussion on malicious mining algorithms. Though
those are not entirely prevented by reducing block propagation times,
they can be significantly limited compared to the current, rather
disjoint, network.