Koz Ross on Nostr: nprofile1q…726sn Why choose those numbers? Basically, this comes from a CNC Kitchen ...
nprofile1qy2hwumn8ghj7un9d3shjtnddaehgu3wwp6kyqpq2atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25q6726sn (nprofile…26sn) Why choose those numbers? Basically, this comes from a CNC Kitchen video about ratios of EW to layer height, as well as nozzle diameter: https://www.youtube.com/watch?v=9YaJ0wSKKHA
The tl;dw conclusions are:
* The ideal EW is between 100 and 150% of nozzle diameter; going lower or higher loses us strength.
* The ratio between EW and layer height should be at least 2:1; less loses strength fairly fast, but more doesn't improve it too much.
The second point is backed by academic research.
4/?
The tl;dw conclusions are:
* The ideal EW is between 100 and 150% of nozzle diameter; going lower or higher loses us strength.
* The ratio between EW and layer height should be at least 2:1; less loses strength fairly fast, but more doesn't improve it too much.
The second point is backed by academic research.
4/?