t. khan [ARCHIVE] on Nostr: 📅 Original date posted:2016-12-05 📝 Original message:BIP Proposal - Managing ...
📅 Original date posted:2016-12-05
📝 Original message:BIP Proposal - Managing Bitcoin’s block size the same way we do difficulty
(aka Block75)
The every two-week adjustment of difficulty has proven to be a reasonably
effective and predictable way of managing how quickly blocks are mined.
Bitcoin needs a reasonably effective and predictable way of managing the
maximum block size.
It’s clear at this point that human beings should not be involved in the
determination of max block size, just as they’re not involved in deciding
the difficulty.
Instead of setting an arbitrary max block size (1MB, 2MB, 8MB, etc.) or
passing the decision to miners/pool operators, the max block size should be
adjusted every two weeks (2016 blocks) using a system similar to how
difficulty is calculated.
Put another way: let’s stop thinking about what the max block size should
be and start thinking about how full we want the average block to be
regardless of size. Over the last year, we’ve had averages of 75% or
higher, so aiming for 75% full seems reasonable, hence naming this concept
‘Block75’.
The target capacity over 2016 blocks would be 75%. If the last 2016 blocks
are more than 75% full, add the difference to the max block size. Like this:
MAX_BLOCK_BASE_SIZE = 1000000
TARGET_CAPACITY = 750000
AVERAGE_OVER_CAP = average block size of last 2016 blocks minus
TARGET_CAPACITY
To check if a block is valid, ≤ (MAX_BLOCK_BASE_SIZE + AVERAGE_OVER_CAP)
For example, if the last 2016 blocks are 85% full (average block is 850
KB), add 10% to the max block size. The new max block size would be 1,100
KB until the next 2016 blocks are mined, then reset and recalculate. The
1,000,000 byte limit that exists currently would remain, but would
effectively be the minimum max block size.
Another two weeks goes by, the last 2016 blocks are again 85% full, but now
that means they average 935 KB out of the 1,100 KB max block size. This is
93.5% of the 1,000,000 byte limit, so 18.5% would be added to that to make
the new max block size of 1,185 KB.
Another two weeks passes. This time, the average block is 1,050 KB. The new
max block size is calculated to 1,300 KB (as blocks were 105% full, minus
the 75% capacity target, so 30% added to max block size).
Repeat every 2016 blocks, forever.
If Block75 had been applied at the difficulty adjustment on November 18th,
the max block size would have been 1,080KB, as the average block during
that period was 83% full, so 8% is added to the 1,000KB limit. The current
size, after the December 2nd adjustment would be 1,150K.
Block75 would allow the max block size to grow (or shrink) in response to
transaction volume, and does so predictably, reasonably quickly, and in a
method that prevents wild swings in block size or transaction fees. It
attempts to keep blocks at 75% total capacity over each two week period,
the same way difficulty tries to keep blocks mined every ten minutes. It
also keeps blocks as small as possible.
Thoughts?
-t.k.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20161205/c24d6c6d/attachment.html>;
📝 Original message:BIP Proposal - Managing Bitcoin’s block size the same way we do difficulty
(aka Block75)
The every two-week adjustment of difficulty has proven to be a reasonably
effective and predictable way of managing how quickly blocks are mined.
Bitcoin needs a reasonably effective and predictable way of managing the
maximum block size.
It’s clear at this point that human beings should not be involved in the
determination of max block size, just as they’re not involved in deciding
the difficulty.
Instead of setting an arbitrary max block size (1MB, 2MB, 8MB, etc.) or
passing the decision to miners/pool operators, the max block size should be
adjusted every two weeks (2016 blocks) using a system similar to how
difficulty is calculated.
Put another way: let’s stop thinking about what the max block size should
be and start thinking about how full we want the average block to be
regardless of size. Over the last year, we’ve had averages of 75% or
higher, so aiming for 75% full seems reasonable, hence naming this concept
‘Block75’.
The target capacity over 2016 blocks would be 75%. If the last 2016 blocks
are more than 75% full, add the difference to the max block size. Like this:
MAX_BLOCK_BASE_SIZE = 1000000
TARGET_CAPACITY = 750000
AVERAGE_OVER_CAP = average block size of last 2016 blocks minus
TARGET_CAPACITY
To check if a block is valid, ≤ (MAX_BLOCK_BASE_SIZE + AVERAGE_OVER_CAP)
For example, if the last 2016 blocks are 85% full (average block is 850
KB), add 10% to the max block size. The new max block size would be 1,100
KB until the next 2016 blocks are mined, then reset and recalculate. The
1,000,000 byte limit that exists currently would remain, but would
effectively be the minimum max block size.
Another two weeks goes by, the last 2016 blocks are again 85% full, but now
that means they average 935 KB out of the 1,100 KB max block size. This is
93.5% of the 1,000,000 byte limit, so 18.5% would be added to that to make
the new max block size of 1,185 KB.
Another two weeks passes. This time, the average block is 1,050 KB. The new
max block size is calculated to 1,300 KB (as blocks were 105% full, minus
the 75% capacity target, so 30% added to max block size).
Repeat every 2016 blocks, forever.
If Block75 had been applied at the difficulty adjustment on November 18th,
the max block size would have been 1,080KB, as the average block during
that period was 83% full, so 8% is added to the 1,000KB limit. The current
size, after the December 2nd adjustment would be 1,150K.
Block75 would allow the max block size to grow (or shrink) in response to
transaction volume, and does so predictably, reasonably quickly, and in a
method that prevents wild swings in block size or transaction fees. It
attempts to keep blocks at 75% total capacity over each two week period,
the same way difficulty tries to keep blocks mined every ten minutes. It
also keeps blocks as small as possible.
Thoughts?
-t.k.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxfoundation.org/pipermail/bitcoin-dev/attachments/20161205/c24d6c6d/attachment.html>;