Erik on Nostr: Most of those can be computed by hand, without running it. The main problem here is ...
Most of those can be computed by hand, without running it.
The main problem here is that, using diff 1 blocks, communication with the stratum server will probably dominate the process. You'll see way lower stats than it should be. IIRC, those bitmain machines will give you a pretty accurate number, I would use it.
Connect to some pool (can be your own pool running e.g. ckpool), wait for it to auto-tune and record the numbers it spits out.
About the on-board sensors, I haven't looked at the new UI, but in principle, all asics can report back their temps. Its's a OK sensor built into the chip, so I don't think you can get more accurate than that. cgminer used to log temp for chips, you can try reading those....
The main problem here is that, using diff 1 blocks, communication with the stratum server will probably dominate the process. You'll see way lower stats than it should be. IIRC, those bitmain machines will give you a pretty accurate number, I would use it.
Connect to some pool (can be your own pool running e.g. ckpool), wait for it to auto-tune and record the numbers it spits out.
About the on-board sensors, I haven't looked at the new UI, but in principle, all asics can report back their temps. Its's a OK sensor built into the chip, so I don't think you can get more accurate than that. cgminer used to log temp for chips, you can try reading those....