Johan Torås Halseth [ARCHIVE] on Nostr: 📅 Original date posted:2023-05-30 🗒️ Summary of this message: The proposal ...
📅 Original date posted:2023-05-30
🗒️ Summary of this message: The proposal for coin pools achieves the first part of removing data from the merkle tree, but removal of a public key from the taproot internal key is out of scope. Falling back to "old style multisig" can provide some benefits. There may be reasonable CoinPools designs without additional opcodes.
📝 Original message:I should clarify: the current proposal already achieves the first part
needed for coin pools: removing some data from the merkle tree (I was
indeed referring to the embedded data, not the taptree).
The thing that is missing is removal of a public key from the taproot
internal key, but as mentioned I do agree that this is out of scope
for this proposal.
I believe you can get many of the benefits by falling back to "old
style multisig" in case someone exits the pool, by having a tap leaf
defining a multisig check amongst the remaining pubkeys.
Cheers,
Johan
> It seems likely that efficient use of the taproot internal pubkey with
> "dynamic key aggregation" is not possible with the current semantics
> (unless one ventures into the fraud proof machinery, which seems
> overkill!).
>
> However, in constructions with MATT opcodes, I would never expect the
> need for data to be stored in the taptree. In particular, for the case
> of CoinPools, the pubkeys of the members could also be stored in the
> embedded data, having a single "unilateral withdrawal" tapleaf.
> Removing a key would then amount to replacing it with a fixed NUMS key
> and computing the new root (re-using the same Merkle proof).
> Note that this is not a lot costlier than using a tapleaf per user:
> instead of paying the cost for the Merkle proof in the control block,
> you pay for it explicitly in the Script witness.
>
> Therefore, I would expect there to be reasonable CoinPools designs
> without additional opcodes − but I am only moderately confident as
> this is beyond the level of sophistication I've been exploring so far.
On Sun, May 28, 2023 at 12:24 PM Salvatore Ingala
<salvatore.ingala at gmail.com> wrote:
>
> Hi Johan,
>
> Exciting to finally see some merkleization, which was only confined
> within the meme, up to this point!
>
> > A simpler way IMO, would be to make OP_CICV and OP_COCV symmetrical:
> > Have OP_CICV take an optional taproot and do the same check as is
> > done for the output: Q == tweak(tweak(X,D), T).
>
> I think that's an excellent suggestion, which I was already exploring
> for a different purpose: bringing externally signed data onto the
> stack. My goal there was to allow eltoo-style replacement.
>
> Until recently, I thought that a clean/efficient version of eltoo
> would require OP_CHECKSIGFROMSTACK or ANYPREVOUT. However, extending
> OP_CHECKINPUTCONTRACTVERIFY to enable introspection of other inputs
> allows a reasonable workaround: producing a separate UTXO signed with
> ANYONECANPAY, with the required data embedded as usual. Spending that
> UTXO together with the channel's UTXO allows one to get that data
> on the stack (with its signature already checked by consensus rules).
> I drafted this idea in a gist [1].
>
> Remark: it still seems easier (and probably slightly more efficient)
> to build eltoo replacement with CSFS or APO in addition to MATT
> opcodes.
>
> A possible semantics for OP_CHECKINPUTCONTRACTVERIFY could then be
> exactly symmetrical to that of OP_CHECKOUTPUTCONTRACTVERIFY, with
> the exception that the special input index -1 would represent the
> current input.
>
> Pushing this further, another option that could be be worth exploring
> is to have a single OP_CHECK_IN_OUT_CONTRACT_VERIFY opcode, with the
> same semantics as OP_CHECKOUTPUTCONTRACTVERIFY from [2], but with an
> additional `flags` argument, which is a bitmap where:
> - the lowest-significant bit determines if the index refers to inputs
> or outputs (where input index -1 refers to the current input)
> - the second bit specifies if amounts should be preserved with
> deferred checks as described in [2] (only applicable to outputs)
> - other bits are OP_SUCCESS and reserved for future behaviors.
>
> This would make the opcodes 1-2 bytes larger, but might allow greater
> flexibility, and keep some room for future extensions.
>
> > 2.To make fully functioning CoinPools, one would need functionality
> > similar to OP_MERKLESUB[4]: remove some data from the merkle tree,
> > and remove a key from the aggregated internal key.
>
> It seems likely that efficient use of the taproot internal pubkey with
> "dynamic key aggregation" is not possible with the current semantics
> (unless one ventures into the fraud proof machinery, which seems
> overkill!).
>
> However, in constructions with MATT opcodes, I would never expect the
> need for data to be stored in the taptree. In particular, for the case
> of CoinPools, the pubkeys of the members could also be stored in the
> embedded data, having a single "unilateral withdrawal" tapleaf.
> Removing a key would then amount to replacing it with a fixed NUMS key
> and computing the new root (re-using the same Merkle proof).
> Note that this is not a lot costlier than using a tapleaf per user:
> instead of paying the cost for the Merkle proof in the control block,
> you pay for it explicitly in the Script witness.
>
> Therefore, I would expect there to be reasonable CoinPools designs
> without additional opcodes − but I am only moderately confident as
> this is beyond the level of sophistication I've been exploring so far.
>
> Best,
> Salvatore
>
> [1] - https://gist.github.com/bigspider/041ebd0842c0dcc74d8af087c1783b63
> [2] - https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2023-April/021588.html
🗒️ Summary of this message: The proposal for coin pools achieves the first part of removing data from the merkle tree, but removal of a public key from the taproot internal key is out of scope. Falling back to "old style multisig" can provide some benefits. There may be reasonable CoinPools designs without additional opcodes.
📝 Original message:I should clarify: the current proposal already achieves the first part
needed for coin pools: removing some data from the merkle tree (I was
indeed referring to the embedded data, not the taptree).
The thing that is missing is removal of a public key from the taproot
internal key, but as mentioned I do agree that this is out of scope
for this proposal.
I believe you can get many of the benefits by falling back to "old
style multisig" in case someone exits the pool, by having a tap leaf
defining a multisig check amongst the remaining pubkeys.
Cheers,
Johan
> It seems likely that efficient use of the taproot internal pubkey with
> "dynamic key aggregation" is not possible with the current semantics
> (unless one ventures into the fraud proof machinery, which seems
> overkill!).
>
> However, in constructions with MATT opcodes, I would never expect the
> need for data to be stored in the taptree. In particular, for the case
> of CoinPools, the pubkeys of the members could also be stored in the
> embedded data, having a single "unilateral withdrawal" tapleaf.
> Removing a key would then amount to replacing it with a fixed NUMS key
> and computing the new root (re-using the same Merkle proof).
> Note that this is not a lot costlier than using a tapleaf per user:
> instead of paying the cost for the Merkle proof in the control block,
> you pay for it explicitly in the Script witness.
>
> Therefore, I would expect there to be reasonable CoinPools designs
> without additional opcodes − but I am only moderately confident as
> this is beyond the level of sophistication I've been exploring so far.
On Sun, May 28, 2023 at 12:24 PM Salvatore Ingala
<salvatore.ingala at gmail.com> wrote:
>
> Hi Johan,
>
> Exciting to finally see some merkleization, which was only confined
> within the meme, up to this point!
>
> > A simpler way IMO, would be to make OP_CICV and OP_COCV symmetrical:
> > Have OP_CICV take an optional taproot and do the same check as is
> > done for the output: Q == tweak(tweak(X,D), T).
>
> I think that's an excellent suggestion, which I was already exploring
> for a different purpose: bringing externally signed data onto the
> stack. My goal there was to allow eltoo-style replacement.
>
> Until recently, I thought that a clean/efficient version of eltoo
> would require OP_CHECKSIGFROMSTACK or ANYPREVOUT. However, extending
> OP_CHECKINPUTCONTRACTVERIFY to enable introspection of other inputs
> allows a reasonable workaround: producing a separate UTXO signed with
> ANYONECANPAY, with the required data embedded as usual. Spending that
> UTXO together with the channel's UTXO allows one to get that data
> on the stack (with its signature already checked by consensus rules).
> I drafted this idea in a gist [1].
>
> Remark: it still seems easier (and probably slightly more efficient)
> to build eltoo replacement with CSFS or APO in addition to MATT
> opcodes.
>
> A possible semantics for OP_CHECKINPUTCONTRACTVERIFY could then be
> exactly symmetrical to that of OP_CHECKOUTPUTCONTRACTVERIFY, with
> the exception that the special input index -1 would represent the
> current input.
>
> Pushing this further, another option that could be be worth exploring
> is to have a single OP_CHECK_IN_OUT_CONTRACT_VERIFY opcode, with the
> same semantics as OP_CHECKOUTPUTCONTRACTVERIFY from [2], but with an
> additional `flags` argument, which is a bitmap where:
> - the lowest-significant bit determines if the index refers to inputs
> or outputs (where input index -1 refers to the current input)
> - the second bit specifies if amounts should be preserved with
> deferred checks as described in [2] (only applicable to outputs)
> - other bits are OP_SUCCESS and reserved for future behaviors.
>
> This would make the opcodes 1-2 bytes larger, but might allow greater
> flexibility, and keep some room for future extensions.
>
> > 2.To make fully functioning CoinPools, one would need functionality
> > similar to OP_MERKLESUB[4]: remove some data from the merkle tree,
> > and remove a key from the aggregated internal key.
>
> It seems likely that efficient use of the taproot internal pubkey with
> "dynamic key aggregation" is not possible with the current semantics
> (unless one ventures into the fraud proof machinery, which seems
> overkill!).
>
> However, in constructions with MATT opcodes, I would never expect the
> need for data to be stored in the taptree. In particular, for the case
> of CoinPools, the pubkeys of the members could also be stored in the
> embedded data, having a single "unilateral withdrawal" tapleaf.
> Removing a key would then amount to replacing it with a fixed NUMS key
> and computing the new root (re-using the same Merkle proof).
> Note that this is not a lot costlier than using a tapleaf per user:
> instead of paying the cost for the Merkle proof in the control block,
> you pay for it explicitly in the Script witness.
>
> Therefore, I would expect there to be reasonable CoinPools designs
> without additional opcodes − but I am only moderately confident as
> this is beyond the level of sophistication I've been exploring so far.
>
> Best,
> Salvatore
>
> [1] - https://gist.github.com/bigspider/041ebd0842c0dcc74d8af087c1783b63
> [2] - https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2023-April/021588.html