Koz Ross on Nostr: nprofile1q…726sn Just for reference, the manufacturer suggests 230-260C on the ...

nprofile1qy2hwumn8ghj7un9d3shjtnddaehgu3wwp6kyqpq2atwfrq4rfv7fqara6gzsgrgj7k8ngewzl5nzs46agwyxzh0e25q6726sn (nprofile…26sn) Just for reference, the manufacturer suggests 230-260C on the nozzle (far, _far_ too low), 70-90C on the bed (roughly what I'd expect, if maybe a smidge high). The temperature suggestion on the hotend is particularly egregious: even with non-CF PETG on a non-hardened nozzle, these figures are low. CF drains heat from the system (by absorbing heat that doesn't contribute to flow), and hardened nozzles often have poor thermal conductivity: both need temperature bumps usually. (4/?)